Interoperable three-dimensional medical device tracking with a fibre-optic ultrasound transmitter

Project reference: DTP_SIE_08 
First supervisor: Wenfeng Xia 
Second supervisor: Tom Vercauteren 

Start date: October 2020   

Project summary: A long-standing problem in minimally invasive procedures guided with ultrasound imaging is the identification of the medical device tip within the body. 

 

Project description: Ultrasonic visualisation of medical devices such as needles can be very challenging when the distal ends are not coincident with the ultrasound (US) imaging plane. This occurs frequently in clinical practice: during “in-plane” insertions, a thin needle can readily stray from the imaging plane; during “out-of-plane” insertions, only a small region of the needle in the vicinity of the imaging plane can be visualised, and in this region, the needle tip can have a very similar appearance to that of the needle shaft. Additionally, medical device visibility can be lost during steep, large-angle insertions, as US waves are reflected away from the US probes. This problem is experienced acutely during percutaneous interventions in many clinical fields, including fetal medicine 1 and neonatology 2. Serious complications can arise from loss of visibility of the medical device. 

 

We have pioneered the developments of ultrasonic tracking, a technique that is based on ultrasound communication between an external ultrasound imaging probe and a fibre-optic receiver that is integrated within the interventional device. Robust demonstrations of this technology up to large animal models have been published by the team. However, the first-generation system relied on an ultrasound imaging device that can be operated in research mode but provides substandard image quality. Additionally, 3D tracking with this system requires the use of a custom ultrasound probe comprising transducer arrays for both ultrasound imaging and tracking. These limitations make clinical translation of the technology non-straightforward and prevent the use of the technology with state-of-the-art clinical ultrasound imaging systems. 

 

This project aims to develop a new generation 3D tracking system that will address the abovementioned limitations. It will be based on a tracked fibre-optic ultrasound transmitter and an ultrasound detector with multiple elements attached to an external ultrasound imaging probe. Ultrasound transmissions will be received by the detector and processed to obtain 3D position of the device tip. The positional information will be overlaid on ultrasound images on a second monitor in real-time, separated from that of the ultrasound imaging system. As such, the developed tracking system will be fully compatible with most of clinical ultrasound imaging systems, and therefore hold the potential for widespread clinical use for guiding minimally invasive procedures in many clinical fields. The success of this project will augment research activities for a Wellcome/EPSRC funded project Gift-Surg, and will catalyse new collaborations within the School. 

©2020 by CDT SIE